Airbrush Cleaning Pot
(Airbrushes not included)
The airbrush cleaning pot holds two airbrushes firmly and safely.
One airbrush is held in a rubber housing (which feeds in to the glass jar of the cleaning station) whilst the other sits within a further airbrush holder situated on top of the cleaning pot.
These firm airbrush holders allow you two keep both hands free whilst topping your airbrush up with paint or mixing/reducing.
No more spilled paint or, worse still, damaged needles when you drop your airbrush. The BARTSHARP Airbrush cleaning pot will also help keep your general working area tidy.
How does an airbrush cleaning pot work?
Pour out excess paint from your airbrush paint cup and simply place your airbrush in to the rubber housing which feeds in to the glass pot section.
Use water or airbrush cleaning fluid to then flush your airbrush through until it shoots clean. The ejected paint/cleaner/water is captured in the glass jar whilst the small filter, situated in the top section of the holder, greatly reduces the amount of paint/cleaning vapour in your working environment.
Even water based paints have VOC (volatile organic compounds) which can aggravate your lungs and throat.
If you are using solvent based paint we strongly recommend the use of a quality face mask as these paints contain a much higher level of VOC and are known to be hazardous to health and the major organs of the body.
The cleaning pot is made of very robust weighty glass which ensures that the unit is very stable during use. The bottom of the cleaning pot is 13 centimetres in diameter which adds to the unit’s stability.
The cleaning pot is 13 centimetres tall (to the top of the white lid).
Airbrush Cleaning Brushes Set
Each airbrush cleaning brushes set is made using high quality rust resistant twisted wire and durable high quality nylon brushes, highly resistant to solvents.
The Cleaning Brushes Set comprises of 5 individual nylon brushes on a small key ring with a range of diameters:
- 2.0mm, 2.5mm, 3.0mm, 4.0mm and 5mm
Airbrush Cleaning Brushes are used, in conjunction with an airbrush cleaning medium, to thoroughly clean the inner channels and small apertures of the airbrush.
They can be used as part of your colour change or airbrush flushing process but should always be used as part of your final clean.
Thorough cleaning of your airbrush will ensure its long life and trouble free use.
Airbrush Cleaning Needles Set
Each Airbrush Cleaning Needles Set is made using high quality rust resistant twisted wire.
The Cleaning Needles Set comprises of 5 individual twisted wires on a small key ring with a range of diameters:
- 0.4mm, 0.7mm, 1.0mm, 1.2mm and 1.4mm
Airbrush Cleaning Needles are used prior to cleaning brushes as the twisted wire, in conjunction with an airbrush cleaning medium, removes dried on paint.
Airbrush Cleaning Needles are an essential tool to remove all airbrushing mediums and are an absolute must for the airbrush artist using acrylic airbrush paints.
Airbrush Wash Needle
If you are using acrylic paints you will know that they can set as hard as stone!
We would strongly recommend the use of an Airbrush Wash Needle / Nozzle Reamer tool which is inexpensive and will precisely remove dried on paint from the inside wall of your airbrush nozzle.
It has a tapered blade incorporating a flat side,which, when inserted into the nozzle and turned, will carefully shave off dried on paint.
(Fits all nozzle sizes).
This little tool can return your nozzle to prime working performance and will save you many pounds as you won't have to keep buying new nozzles.