VEDA 115 Airbrush Kit Gravity Feed
The VEDA 115 Airbrush Kit comes fitted with a 0.5mm needle and nozzle cap.
The kit also includes a 0.3mm needle set.
The VEDA 115 Airbrush Kit is a gravity feed single variable action airbrush. Simply pull back on the airbrush trigger to release air and pull back further, on the airbrush trigger, to release paint.
The 115 Airbrush is an ideal option for those wishing to spray larger areas whilst not requiring the need for great detail. Such applications include: cake decoration, model base and top coats, war gaming scenery painting, model railway scenery painting, custom automotive painting, spray tan etc.
The 115 Airbrush has a durable plastic housing with metal needle, nozzle/nozzle cap.
The paint cup is 20cc, however, a larger 75cc paint cup is available for those needing to spray larger areas.
The male air inlet valve is 1/8thBSP. 1/8thBSP is approximately 9.35mm but is sometimes referred to as 1/8th inch.
A 1.8m air hose (1/8BSP to 1/8BSP fittings) is included and a direct fit for the airbrush air inlet.
Quick release coupler. The main body simply screws into the air hose whilst the spring released connector screws onto the mail air inlet valve on the airbrush.
Mini in line air filter. This small filter provides a second barrier to water vapour and protects your paint medium from contamination.
Again, this unit simply screw onto the air inlet of the airbrush and can be used in conjunction with the quick release coupler.
The VEDA 115 Airbrush Airbrush is fitted with an adjustable needle stop at the rear of the handle. This feature allows the airbrush artist to create lines of an equal width as it controls how far the needle can be pulled back from the nozzle.
The R/V 115 Airbrush can be used at air pressures between 15 – 50 PSI and is suitable for use with many airbrush compressors. They are a direct fit for any airbrush compressor in our Air Brush Compressor range.
Please see the link to airbrush compressor at the bottom of this page.
The R/V 115 Airbrush is fitted with a Teflon Needle Packing Bush which is highly impervious to solvent based paints (spares are available within our airbrush spares section). It is also fitted with rubber o-rings which can be affected by solvent based paints. The level of affect depends on the strength of the solvent, exposure time and how well the airbrush is cleaned after use and storage.
We stock a fantastic range of replacement O-ring sets which are very low in price should you wish to use solvent based paint.
Veda Airbrushes are brought to you by the UK's and Europe's sole authorised retailer: BARTSHARP Airbrush®
BARTSHARP Airbrush® will not be stocking any further airbrushes from VEDA.
The original manufacturer of VEDA neglected to register their trademark.
This allowed a person, totally un-associated with the original manufacturer, or airbrushing in general, to register and own the trademark.
We have had to purchase the right to use the VEDA trademark for the last 12 months.
The original manufacturer of VEDA has stated that if they do continue to manufacture under this brand name the products will be of the lowest quality
as they have no interest in producing something they have no control over or benefit from.
BARTSHARP Airbrush® will not stock inferior airbrushes and pass them on to our customers.
All of our current VEDA stock is from the original manufacturer; however, you should be aware that VEDA products, available elsewhere, may be much lower quality or even copies.
Now the good news.......
BARTSHARP Airbrush® has now teamed up with a top manufacturer, highly endorsed by world famous airbrush artist, Chuck Bauman, from Airbrush Techniques Magazine, to develop and produce its own brand and range of airbrushes.
We have taken all that we have learned from our customers and are now be able to offer a range of airbrushes which offer the same value for money, as the VEDA range,
whilst actually improving on performance and reliability as they are manufactured to higher tolerances.
We are really proud of our new range of airbrushes bearing the BARTSHARP Airbrush® trademark and know that they will offer our customers even better value for money than the VEDA range!
The BARTSHARP Airbrush® range is extensive and includes models for all areas of airbrushing.
The range includes dual action gravity feed airbrushes, dual action siphon feed airbrushes, single variable action airbrushes and even an airbrush eraser.
The airbrush range includes models which are of the traditional pen style and a new pistol grip design.
Some of the BARTSHARP Airbrush® range incorporates a new design nozzle and nozzle cap.
These are nozzle and nozzle caps are physically larger than the traditional styles whilst retaining the same inner dimensions for the use of 0.2mm, 0.3mm, 0.5mm and 0.8mm needles.
The new design nozzles are easier to handle and do not need to be screwed into the airbrush as they are held in place by the new design nozzle cap.
This makes cleaning a nozzle change a breeze. There is no longer any need to use a small spanner tool to try and fit the nozzle to the airbrush.
As you would expect, we have a complete stock of airbrush spares and accessories including airbrush needles, airbrush nozzles, airbrush nozzle caps, airbrush o ring sets and more.