VEDA 134 Airbrush Kit
The VEDA 134S airbrush kit represents incredible value for money value for money and, if purchased separately, the items would cost in excess of £46.00!
The VEDA 134 airbrush is dual action with both gravity side feed and siphon side feed features.
It is fitted with a 0.3mm needle set and can also be fitted with a 0.2mm and 0.5mm needle set (included in the complete airbrush kit).
The airbrush air inlet is 1/8BSP which is approximately 9.35mm. BPS denotes British Standard Pipe and defines the type and pitch of thread.
A needle adjust screw, at the rear of the airbrush handle, allow the user to preset the distance the needle travel back which means that lines, of the same thickness, can be created over and over.
The VEDA 134 airbrush has a 7cc side gravity feed paint cup and a 22cc side siphon feed paint jar.
This complete airbrush kit includes;
Spare airbrush needle, nozzle and nozzle cap set (0.2mm and 0.5mm) and an airbrush quick disconnect,
Veda Airbrushes are brought to you by the UK's and Europe's sole authorised retailer: BARTSHARP Airbrush®
BARTSHARP Airbrush® will not be stocking any further airbrushes from VEDA.
The original manufacturer of VEDA neglected to register their trademark.
This allowed a person, totally un-associated with the original manufacturer, or airbrushing in general, to register and own the trademark.
We have had to purchase the right to use the VEDA trademark for the last 12 months.
The original manufacturer of VEDA has stated that if they do continue to manufacture under this brand name the products will be of the lowest quality
as they have no interest in producing something they have no control over or benefit from.
BARTSHARP Airbrush® will not stock inferior airbrushes and pass them on to our customers.
All of our current VEDA stock is from the original manufacturer; however, you should be aware that VEDA products, available elsewhere, may be much lower quality or even copies.
Now the good news.......
BARTSHARP Airbrush® has now teamed up with a top manufacturer, highly endorsed by world famous airbrush artist, Chuck Bauman, from Airbrush Techniques Magazine, to develop and produce its own brand and range of airbrushes.
We have taken all that we have learned from our customers and are now be able to offer a range of airbrushes which offer the same value for money, as the VEDA range,
whilst actually improving on performance and reliability as they are manufactured to higher tolerances.
We are really proud of our new range of airbrushes bearing the BARTSHARP Airbrush® trademark and know that they will offer our customers even better value for money than the VEDA range!
The BARTSHARP Airbrush® range is extensive and includes models for all areas of airbrushing.
The range includes dual action gravity feed airbrushes, dual action siphon feed airbrushes, single variable action airbrushes and even an airbrush eraser.
The airbrush range includes models which are of the traditional pen style and a new pistol grip design.
Some of the BARTSHARP Airbrush® range incorporates a new design nozzle and nozzle cap.
These are nozzle and nozzle caps are physically larger than the traditional styles whilst retaining the same inner dimensions for the use of 0.2mm, 0.3mm, 0.5mm and 0.8mm needles.
The new design nozzles are easier to handle and do not need to be screwed into the airbrush as they are held in place by the new design nozzle cap.
This makes cleaning a nozzle change a breeze. There is no longer any need to use a small spanner tool to try and fit the nozzle to the airbrush.
As you would expect, we have a complete stock of airbrush spares and accessories including airbrush needles, airbrush nozzles, airbrush nozzle caps, airbrush o ring sets and more.