VEDA 135 Airbrush Dual Action Gravity Feed
The VEDA 135 Airbrush dual action with gravity feed comes fitted with a 0.3mm needle, nozzle and nozzle cap.
The VEDA 135 Air brush can also be fitted with 0.2mm and 0.5mm airbrush needle, nozzle and nozzle cap. Airbrush Spares .
The VEDA 135 Airbrush dual action feature: simply push down on the airbrush trigger to release air and pull back on the airbrush trigger to release paint.
Careful control allows for the creation of very detailed design work and lines as fine as 1mm or less. The maximum spray area is approximately 40mm (depending on distance from work).
The VEDA 135 Airbrush is constructed from metal and has a 2cc paint cup. The open cup design allows for easy cleaning and flushing for quick paint colour change. The reduced size cup also reduces paint wastage.
The air brush air inlet is valve is a threaded male 1/8thBSP. 1/8thBSP is approximately 9.35mm but is sometimes referred to as 1/8th inch.
The air inlet valve is removable which makes cleaning, by use of an ultrasonic cleaner, safer.
Unnecessary full immersion of the air body valve in cleaning fluids will damage the o-rings and may cause the trigger movement to become sticky.
The VEDA 135 Airbrush is fitted with an adjustable needle stop at the rear of the handle.
This feature allows the airbrush artist to create lines of an equal width as it controls how far the needle can be pulled back from the nozzle.
The VEDA 135 Airbrush can be used at air pressures between 15 – 50 PSI and is suitable for use with many air brush compressors.
They are a direct fit for any airbrush compressor in our Royal Air Brush Compressor range.
The VEDA 135 Airbrush is fitted with a Teflon Needle Packing Bush which is highly impervious to solvent based paints (spares are available within our airbrush spares section).
It is also fitted with rubber o-rings which can be affected by solvent based paints. The level of affect depends on the strength of the solvent, exposure time and how well the airbrush is cleaned after use and storage.
We stock a fantastic range of replacement O-ring sets which are very low in price should you wish to use solvent based paint.
As authorised stockists of Iwata Airbrushes we have a number of Iwata Airbrushes which are fully resistant to solvent based paints. However, these air brushes are priced in excess of £250.
The VEDA 135 Airbrush dual action and gravity feed, is ideal for airbrushing fine grain detail for:
Illustration, Photo Retouching
Scale Model Painting
Airbrush Body Art
Custom Automotive Painting
T-Shirts and Textiles.
Airbrush Technique Magazine and famous airbrush artist Chuck Bauman reviewed the VEDA airbrush range:
“High Quality and Extremely Low Priced“ “I recommend the Veda Model 130 and Model 180 Airbrushes. They are easily as good as the famous expensive airbrushes but these are a tenth the cost!“